FAQ
Are your stickers made in the USA?
Yes. All of our products are designed, printed, and packaged in-house right here in Florida. We only source raw materials that are made in the USA.
What is your return policy?
If for any reason you're not happy with your purchase, simply return it within 30 days for a full refund.
How fast and how much is shipping?
Orders are shipped out next business day via USPS Ground Advantage (1-5 business days). We also offer upgraded shipping via USPS Priority Mail (1-3 business days).
Price for domestic US shipping is $4.99 and FREE for orders $19+.
Do you charge sales tax?
Only on orders shipped to Florida. Sales tax is calculated during checkout based on your shipping address.
How do I apply the sticker to my car?
Please visit our installation instructions page.
What are your stickers made of?
Our stickers are printed on high-quality, USA-made vinyl using UV-protected inks. They're built to last 10+ years, indoors or outdoors.
Where do you sell your stickers?
Right here on our website and on other online retailers such as Amazon.
How long will my sticker last?
In most cases, our stickers will last 10+ years or until you replace the thing you stuck it on. They're made with pro-grade vinyl, the same material used on commercial vehicle wraps, and they're UV-resistant to keep colors from fading.
My sticker won't peel off the backing paper. What do I do?
This is rare, but it happens. If your sticker looks like it's just paper with no adhesive, don't keep picking at the edges with your fingers. That'll just fray the material and make it harder.
What's going on: during manufacturing, the cut that separates the sticker from its backing occasionally goes just a fraction too deep. When that happens, the sticker stays bonded to the backing paper instead of releasing from it. The adhesive is there, it's just still stuck to the backing paper.
The fix: take a small piece of masking tape (or painter's tape, Scotch tape, anything lightly adhesive) and press it onto the top surface of one corner of the sticker. Use the tape to gently pull that corner up and away from the backing paper. The sticker will release, and the adhesive will be right there underneath. Once the corner is free, you can gently peel the tape off the sticker surface.
Why did my sticker fall off?
If a sticker doesn't hold up, it's almost always one of these: a dirty or wet surface, temperature extremes during installation, edges that weren't fully pressed down, installation over a gap or seam where wind can work its way underneath, a heavily textured surface where the adhesive can't make full contact, or someone pulled it off (if an edge is left exposed, it's easy for someone to peel it off, and yes, it happens more often than you'd think).
The good news: all of these are preventable with proper installation. Clean, dry, smooth, fully pressed down, right temperature. That's the formula. Visit our installation instructions for the full guide.
Can I reposition my sticker?
Only our reusable products (Student Driver stickers, wall decals, and window clings) are designed to be removed and reapplied. Our standard vinyl stickers and decals are removable and paint-safe, but they're not designed to be repositioned. Peeling them up and trying to move them risks stretching or distorting the vinyl, and the adhesive won't bond as strongly the second time around. If you need to adjust placement, it's better to do it within the first few seconds of application before the adhesive fully sets.
What should I do if I find a problem with my order?
Please contact us and let us know. We're here to help.
What if I have additional questions?
Still have questions? We're here.